The faulty gearbox on a deck crane was removed, a new unit installed, and the crane tested and returned to service.
Work Carried Out
- Removal of the faulty gearbox
- Inspection of mounting and connection surfaces
- Installation and lubrication of the new gearbox
- Function test and commissioning
Job Details
Following complaints of noise, heat and backlash in the gearbox driving the deck crane, our team carried out an onboard inspection. Oil condition, bearing noise and gear backlash were assessed and the unit was found to require replacement.
With the crane secured and isolated, the hydraulic motor and fasteners were removed and the gearbox lifted out. Flange faces were cleaned, bolt holes and centring checked; the new unit was installed in alignment and torqued to the manufacturer's values.
After assembly the unit was filled with the correct oil, and the motor and hydraulic lines reconnected. Temperature, noise and tightness were monitored during no-load and controlled-load runs.
Checks Performed
- Gear and bearing noise
- Operating temperature
- Oil level and leak check
- Brake and holding function
Outcome
The crane was handed back to operation running smoothly and quietly.
Related service: Crane Maintenance & Repair



