The hose crane's drum, hydraulic block and hydraulic motor were overhauled and repaired.
Work Carried Out
- Drum repair
- Hydraulic block maintenance
- Hydraulic motor repair
- Pressure and operation test
Job Details
The hose crane on a tanker showed drum stiffness, leakage at the hydraulic block and power loss at the motor. The equipment was inspected on site and work was planned at three points.
Drum bearings and shaft area were cleaned and inspected, and worn parts renewed. The hydraulic block was removed and its valves and seals overhauled. The hydraulic motor was opened in the workshop, its internals inspected and parts replaced as needed.
After assembly the system was pressurised for leak checks, and the drum was run under load in both directions while speed and brake behaviour were observed.
Checks Performed
- Drum rotation and brake
- Block and line tightness
- Motor power and speed
Outcome
The hose crane was made ready again for bunkering and loading operations.
Related service: Crane Maintenance & Repair



